跪求指導~~！！

馬上注冊，結交更多好友，享用更多功能，讓你輕松玩轉社區。

您需要登錄才可以下載或查看，沒有帳號？立即加入SketchUp吧！

x

本人新手，布置如何建立這種類型的屋面，求賜教。最好能告訴我用哪款插件，以及使用方法，謝啦~~

登錄/注冊后可看大圖

wine-skin · 2011-3-16 14:12:08

昨天剛發了一組教程，你搜一下。老怪寫的。

對方所 · 2011-3-17 00:01:43

RE: 跪求指導~~！！

It is a example, hopefully it is helpful. And slao you'd better to do some research in this bar, there are alot threads talking about how to build a curvy surface, like 老怪's threads.

登錄/注冊后可看大圖

1-draw 3d curves based on your design

登錄/注冊后可看大圖

2- use extrusion tools

登錄/注冊后可看大圖

3- extrude edge by rails

登錄/注冊后可看大圖

first, pick the profile
second, pick the first and second rails
then, pick the merge profile...
later on, you will get the surface. if there are any dialogs appears just select' no'

登錄/注冊后可看大圖

use soften edges to build nicel looking faces.

then, repeating to get all surface...

here is the plugins....

extrudeTools_20100517.zip (138.04 KB, 下載次數: 47)

lcc大海 · 2011-3-17 13:14:49

回復 對方所的帖子

Thanks a lot~ I got it!~~
Another question is ,How to increasing the thickness of the roof by the "Extrude Tools"

對方所 · 2011-3-17 22:09:47

That is SCF POWERNAR, see the attachment.

Next time, b4 you ask the questions, better to do some research, this is a quite nice bar and there are a lot infor. here.

Good luck!